5. Disconnect the cables from the back of the DVD drive.
6. Push the drive retaining lever tab up to release the lever from its retaining hooks
(see
FIGURE 4-10
7. Gently pull out the DVD drive from the front of the chassis.
8. Place the DVD drive on a static-dissipating work surface or inside an anti-static
bag.
9. Install the new DVD drive as shown in
page
4-16
Sun Ultra 20 Workstation User Guide • August 2006
).
FIGURE 4-10
Removing the DVD Drive
4-17.
Section 4.5.3.2, "Installing a DVD Drive" on