Figure 4-20 Installing A Graphics Card - Sun Microsystems Ultra 20 User Manual

For a PCI Express graphics card (see
■
a. Pull the tab at the right side of the slot away from the slot.
b. Position the card in the selected slot. Ensure that the notch, on the bottom right
corner of the card, engages the latch on the motherboard.
c. Press down on the card until it is completely seated in the slot.
FIGURE 4-20
8. Fasten the retaining screw into place. Torque the screws to 8- to 9-inch pounds.
9. If you are installing a NVIDIA FX3450 card, attach the power supply PCI cable to
the power connector on the FX3450 card.
10. Replace the left-side access panel.
4-28 Sun Ultra 20 Workstation User Guide • August 2006
Installing a Graphics Card
):
FIGURE 4-20