Figure 4-19 Installing A Pci Card - Sun Microsystems Ultra 20 User Manual

To install a PCI or graphics card:
1. Turn off the power switch on the back of the system and the power to all of the
peripherals connected to the system.
2. Remove the left-side access panel.
3. Gently lay the system on its right side on a stable, nonslip surface.
4. Refer to the service label, attached to the inside of the access panel, to help you
choose an empty card slot that is compatible with the card that you are installing.
5. Pull out the slot cover.
Keep it for reassembly later.
6. Remove the PCI or graphics card from its protective packaging, and lay the card
on an antistatic surface until you are ready to install it.
7. Follow the instructions for the type of card you are installing:
For a PCI card (see
■
a. Position the card over the selected slot.
b. Press down on the card until it is completely seated in the slot.
Installing a PCI card
FIGURE 4-19
):
FIGURE 4-19
Chapter 4 Maintaining the Workstation 4-27