Deferred Burn-In Testing; Section 3.5, "Deferred Burn-In Testing - Sun Microsystems Ultra 20 User Manual

To load one of the scripts available to test the devices on your system, do the
following:
●
From the main menu, choose Immediate Burn-in Testing.
The top portion of the window lists the options described in
bottom portion of the window lists the following Burn-in menu options:
Load Burn-in Script
■
Enter one of the following:
■
■
Save Burn-in Script
■
To save a burn-in script that you created, enter d:\testname.tst
Where testname is the name of the script that you created.
Change Options
■
Opens the Burn-in Options menu, which enables you to modify the various
options listed in
Select Tests
■
Opens a listing of the tests available for your workstation configuration and the
currently loaded test script.
Perform Burn-in Tests
■
Starts to run the currently loaded burn-in test script.
3.5

Deferred Burn-In Testing

You can use the Deferred Burn-in Testing option to create and save your own scripts
to run at a later time.
●
From the main menu, choose Deferred Burn-in Testing.
The top portion of the window lists the options described in
bottom portion of the window lists the following Burn-in menu options:
Load Burn-in Script
■
Enter one of the following:
■
■
Where testname is the name that you created.
3-10 Sun Ultra 20 Workstation User Guide • August 2006
quick.tst, noinput.tst, or full.tst
If you created and saved your own script, enter d:\testname.tst
Where testname is the name of the script that you created.
TABLE 3-3
quick.tst, noinput.tst, or full.tst
If you created and saved your own script, enter d:\testname.tst
for the currently loaded test script.
, and the
TABLE 3-3
, and the
TABLE 3-3