System Information Menu; Table 3-1 System Information Menu Options; Section 3.2, "System Information Menu - Sun Microsystems Ultra 20 User Manual

3.2

System Information Menu

TABLE 3-1
TABLE 3-1
Option
System Overview
Hardware ID Image Menu
System Management Information
PCI Bus Information
IDE Bus Information
PCMCIA/CardBus Info
Interrupt Vectors
IRQ Information
Device Drivers
APM Information
I/O Port Browser
Memory Browser
describes each option in the System Information menu.
System Information Menu Options
Description
Includes basic information about your system,
motherboard, BIOS, processor, memory cache, drives,
video, modem, network, buses, and ports.
Enables you to create a document showing information
about your system, including comparisons between the
updates and the newest versions of your system. XML
is the format used to create and display this
information, though you can also choose a text format
(.txt) as well.
Provides information obtained from the system about
the BIOS type, system, motherboard, enclosure,
processors, memory modules, cache, slots, system
event log, memory array, memory devices, memory
device mapped addresses, and system boot.
Includes details about specific devices from pci-
config space within the system, similar to the System
Management Information section.
Shows the master/slave devices on the primary and
secondary IDE controllers.
Not relevant to the Sun Ultra 20 Workstation.
Details and lists device interrupt vector information.
Shows hardware interrupt assignments.
Shows device drivers loaded under Open DOS.
Tests the Advanced Power Management (APM)
capabilities of the system. You can choose to change
the power state, view the power status, indicate CPU
usage, get a PM event, or change the interface mode.
Shows the I/O port assignment for the hardware
devices on the system.
Enables you to view the mapped memory for the entire
system.
Chapter 3 Diagnostics 3-3