Sun Microsystems Ultra 20 User Manual page 116

B.1 Enabling the Onboard ATI Graphics
Controller for Linux or Windows XP
To enable the onboard ATI graphics controller for Linux or Windows XP when a PCI
Express x16 3D graphics card is installed:
1. Power on the system and press the F2 key at the Solaris logo screen.
The BIOS Setup menu displays.
2. Select PnP/PCI Configurations in the main menu.
3. Select the Init Display First option.
4. Change the display order so that PCI is the first display option.
This sets the onboard ATI adapter as the primary output device. If a 3D graphics
card is installed, it functions as the secondary device.
5. Press the F10 key to save your changes and exit.
6. Connect a second monitor to the onboard video connector.
7. For a Windows XP system, you will need to download the ATI drivers from the
following URL:
http://support.ati.com/
Note – Both graphics cards are available as display devices, but you must configure
them correctly. Configuring the graphics cards is an advanced operation. Refer to the
README for the NVIDIA drivers for information specific to your operating system
B-2 Sun Ultra 20 Workstation User Guide • August 2006