Figure 4-34 Cabling Diagram - Sun Microsystems Ultra 20 User Manual

To remove and install system cables:
1. Turn off the power button on the back panel and all of the peripherals connected
to the workstation.
2. Remove the left-side access panel.
3. Gently lay the system on its right side on a stable, nonslip surface.
4. Replace any cables that need to be replaced (see
FIGURE 4-34
5. Ensure that all cable routing is correct, and that all of the cable connectors are
properly seated, before reinstalling the left-side access panel.
4-44 Sun Ultra 20 Workstation User Guide • August 2006
Cabling Diagram
).
FIGURE 4-34