Replacing The Power Supply; Removing The Power Supply; Figure 4-26 Locations Of Power Supply And Cables - Sun Microsystems Ultra 20 User Manual

4.5.8

Replacing the Power Supply

4.5.8.1

Removing the Power Supply

To remove the power supply:
1. Turn off the power button on the back panel and all of the peripherals connected
to the workstation, and then unplug the AC power cord from the system.
2. Remove the left-side access panel.
3. Gently lay the system on its right side on a stable, nonslip surface, and locate the
power supply (see
FIGURE 4-26
4-34 Sun Ultra 20 Workstation User Guide • August 2006
).
FIGURE 4-26
Locations of Power Supply and Cables