Fan Assembly; Removing The Fan Assembly - Sun Microsystems Ultra 1 Series Service Manual
Hide thumbs
Also See for Ultra 1 Series:
- Service manual (218 pages) ,
- Installation manual (61 pages) ,
- Upgrade manual (50 pages)
Table of Contents
Advertisement
4. Route and insert the DC harness through the clip on the drive bracket.
5. Connect the DC connector on the system board at J2603.
6. Connect the DC connector on the system board at J2601.
Figure 8–3
Securing and Connecting the Power Supply
Fan Assembly
1. Disconnect the fan power cable from the fan.
See Figure 8–4.
Sun Ultra 1 Series Service Manual ♦ Revision A, November 1995
42
Advertisement
Table of Contents
