Figure 4-17 Removing A Graphics Card - Sun Microsystems Ultra 20 User Manual

For a PCI Express graphics card (see
■
a. If you are removing a NVIDIA FX3450 card, remove the power supply PCI
cable from the power connector on the FX3450 card.
b. Unfasten and open the PCI card retainer.
FIGURE 4-17
c. Pull the latch that secures the card to the slot away from the card.
d. Remove the graphics card.
Gently rock the card forward, and then lift it straight out of the graphics card slot
and set it aside on an antistatic mat.
6. Choose your next step:
If you are not replacing the PCI or graphics card, replace the slot filler panel and
■
the left-side access panel.
If you are replacing the card, follow the instructions in
■
a PCI or Graphics Card" on page
4-24 Sun Ultra 20 Workstation User Guide • August 2006
Removing a Graphics Card
):
FIGURE 4-17
4-25.
Section 4.5.5.2, "Installing