Removing A Pci Or Graphics Card; Figure 4-16 Removing A Pci Card - Sun Microsystems Ultra 20 User Manual

4.5.5.1

Removing a PCI or Graphics Card

If you are adding a new card and not replacing a PCI or graphics card, go to
Section 4.5.5.2, "Installing a PCI or Graphics Card" on page
To remove a PCI or graphics card:
1. Turn off the system and all of the peripherals connected to it, then unplug the AC
power cord from the system.
2. Remove the left-side access panel.
3. Gently lay the system on its right side on a stable, nonslip surface.
4. Remove any cables connected to the card.
5. Follow the instructions for the type of card you are removing:
For a PCI card (see
■
a. Unscrew the PCI card retainer.
b. Remove the PCI card.
Gently rock the PCI card forward, and then lift it straight out of the PCI card slot
and set it aside on an antistatic mat.
FIGURE 4-16
FIGURE 4-16
Removing a PCI Card
):
Chapter 4 Maintaining the Workstation
4-25.
4-23