Safety Signs; General Safety Recommendations; Electricity Safety - HP A6604 Installation Manual

Safety Signs

When reading this manual, pay attention to the following:
Means the reader be extremely careful. Improper operation may cause device
damage or bodily injury.
Means the reader be careful. Improper operation may cause device
malfunction.

General Safety Recommendations

Keep the router chassis and installation tools away from walk area.

Keep the router far away from a moist area and heat sources.

Unplug all external cables before moving the chassis.


Electricity Safety

Locate the emergency power switch in the equipment room before installation and

maintenance so that you can switch the power off in case of an electrical accident.
Make sure that the router has been correctly grounded.

Do not open or close the chassis cover when the router is powered on.

Connect the interface cables for the router correctly.

Use laser with caution. Do not directly stare into apertures or fiber-optic connectors

that emit laser radiation.
Equip an uninterrupted power supply (UPS).

Disconnect the two power inputs to power off the router if there are two power

inputs.
Avoid maintaining the router alone when it is powered on.

Installation Tools, Meters and Devices
Installation accessories supplied with the router
Power cables

Console cable

PGND cable

Mounting brackets

Cable management bracket

Blank panel

ESD-preventive wrist strap

User supplied tools
Phillips screwdrivers: P1-100 mm, P2-150 mm, and P3-250 mm

Flat-blade screwdriver: P4-75 mm

Screws with various specifications

Various meters and devices, such as hub, configuration terminal, optional modules,

or multimeter.
Optional cables

Reference
When installing or maintaining the device, you can refer to the following documents shipped
with the device: