HP A6604 Installation Manual page 128

FTP User Name
FTP User Password
Table 6-7 Description on the display information of setting Ethernet interface parameters
Display information
'.' = Clear field
'-' = Go to previous field
Ctrl+D = Quit
Protocol (FTP or TFTP)
Load File Name
Target File Name
Server IP Address
Local IP Address
Gateway IP Address
FTP User Name
FTP User Password
To use the default parameter after the colon, press Enter directly.

If the Ethernet port parameter settings fail to pass CRC check, the system adopts the default

settings and displays "Check net params crc error, use the default value."
Step3 After the above configuration, the system will automatically return to the Ethernet parameter set
sub-menu, where you can select 2 to update the main application file.
Loading.........
................
...... .... done
24802996 bytes downloaded!
Updating File cfa0:/main.bin
.........Done!
Step4 After the updating is finished, select 0 to return to the main menu, where you can select 1 to
reboot the system from the CF card.
:
:
Shortcut key . is used to clear the current input.
Shortcut key - is used to return to the previous field.
Shortcut key Ctrl+D is used to quit the parameter setting page.
Choose to update applications using TFTP/FTP
Name of the download file, which needs be the same as that of the actual file to
be downloaded.
At the same time, you need to set the download path in FTP/TFTP.
The first "main.bin" is the file name automatically remembered by the system at
the last update; the second "main.bin" is the source file name set by the user.
An application file name including the extension such as .bin, cannot exceed 50
characters.
Name of the target file after the file is downloaded to the router. The extension of
the target file needs to be same as that of the download file.
The first "main.bin" is the file name automatically remembered by the system at
the last update; the second "main.bin" is the source file name set by the user.
An application file name including the extension such as .bin, cannot exceed 50
characters.
IP address of the FTP/TFTP server.
IP address of the interface connected with the FTP/TFTP server.
IP address of the gateway. You need not configure this IP address.
FTP username, which will be used in FTP download. TFTP download needs no
username.
FTP user password, which will be used in FTP download. TFTP needs no
password.
Description