HP A6604 Installation Manual page 81

Step1 Remove the dust cover from the optical Ethernet transceiver receptacle.
Figure 4-39 Remove the dust cover
Step2 Align an SFP transceiver with the optical SFP transceiver receptacle, with the side having a
release lever facing outward. Then insert it into the optical SFP transceiver receptacle.
Figure 4-40 Insert an SFP module
Step3 Identify the Rx and Tx ports on the SFP transceiver module. Plug the LC connector at one end
of one fiber cable into the Rx port of the router and the LC connector at the other end into the Tx
port of the peer device. Plug the LC connector at one end of another fiber cable into the Tx port
of the router and the LC connector at the other end to the Rx port of the peer device.