HP A6604 Installation Manual page 32

The numbers 1 to 2 in

You can insert a MIM only at the bottom of an interface module slot of FIP-200 because only

the bottom of the slot has a connector.
Maximum interface modules provided by FIP-200s in full configuration
Table 1-25 Maximum interface modules provided by FIP-200s in full configuration
Interface
module
FIP-200
MIMs
HIMs
FIP-210
Introduction
The FIP-210 provides a high-speed service processing capability. The FIP-210 supports
SR6600 HIMs and MIMs, and provides two Combo interfaces. In consideration of smooth
upgrade requirements, the FIP-210 supports two HIMs or two MIMs, or intermixing of a HIM and
a MIM.
Figure 1-26 Front view of the FIP-210
(1) Slot 1
(3) OPEN BOOK sign
(5) Combo interface 0
"OPEN BOOK" sign – Refer to related sections when performing the following operations:
Operation
Plug/unplug an FIP-210
Plug/unplug an MIM
Connect an Ethernet cable
Connect an optical fiber
Figure 1-25 represent Slot 1 and Slot 2 respectively.
One RPE-X1
A6604 A6608
2 4 2
4 8 4
4 8 4
"Installing and Removing an FIP" in Chapter 4 "Installing the Router"
"Installing and Removing a MIM" in Chapter 4 "Installing the Router"
"Connecting the Management Ethernet Interface" and "Connecting Ethernet
Cables" in Chapter 4 "Installing the Router"
"Connecting an optical Ethernet interface" in Chapter 4 "Installing the Router"
Two RPE-X1s
A6604 A6608 A6604
4 Not supported
8 —
8 —
(2) Slot 2
(4) Combo interface 1
Reference
One RSE-X1 Two RSE-X1s
A6608 A6604 A6608