Table of Contents
Advertisement
LEDs
Figure 1-27 FIP-210 LEDs
(1) LED for 10/100/1000 Mbps electrical Ethernet interface 0 (GE0)
(1) LED for 10/100/1000 Mbps electrical Ethernet interface 0 (GE0)
(2) LED for 10/100/1000 Mbps electrical Ethernet interface 1 (GE1)
(2) LED for 10/100/1000 Mbps electrical Ethernet interface 1 (GE1)
(3) Run LED (RUN)
(4) 1000 Mbps optical Ethernet interface LED (SFP1)
(4) 1000 Mbps optical Ethernet interface LED (SFP1)
(5) 1000 Mbps optical Ethernet interface LED (SFP0)
Mbps optical Ethernet interface LED (SFP0)
Table 1-27 Description of FIP
Description of FIP-210 LEDs
LED
RUN (green)
SFP0 and SFP1
(yellow/green)
GE0 and GE1
(yellow/green)
Slots
An FIP-210 can be inserted in slot 2 or 3 of the
210 can be inserted in slot 2 or 3 of the A6604 and slot 2, 3, 4, or 5 of the
interface module slots on a FIP
interface module slots on a FIP-210 are numbered 1 and 2 from right to left, as shown in
1-28.
Figure 1-28 Interface module slots on the FIP
Interface module slots on the FIP-210
Status
Off
Off
No power input is available or the FIP
No power input is available or the FIP-210 has failed.
Slow blinking (1 Hz)
Slow blinking (1 Hz)
The FIP-210 is working normally.
Application program is being loaded (in this case, never power
Application program is being loaded (in this case, never power
Fast blinking (8 Hz)
Fast blinking (8 Hz)
off the device or hot-swap the FIP
may be damaged).
Off
Off
No optical link is present.
Solid green
Solid green
An optical link is present.
Blinking green
Blinking green
Data is being sent or received at a rate of 1000 Mbps.
Data is being sent or received at a rate of 1000 Mbps.
Solid yellow
Solid yellow
The optical transceiver has failed in POST.
The optical transceiver has failed in POST.
Off
Off
No link is present.
Solid green
Solid green
A 1000 Mbps link is present.
Blinking green
Blinking green
Data is being received or transmitted at a rate of 1000 Mbps.
Solid yellow
Solid yellow
A 10/100 Mbps link is present.
Blinking yellow
Blinking yellow
Data is being received or transmitted at a rate of 10/100 Mbps.
Data is being received or transmitted at a rate of 10/100 Mbps.
210 are numbered 1 and 2 from right to left, as shown in
Meaning
Meaning
210 is working normally.
swap the FIP-210; otherwise, the FIP-210
received or transmitted at a rate of 1000 Mbps.
and slot 2, 3, 4, or 5 of the A6608. The
Figure
Advertisement
Table of Contents
Troubleshooting
