HP A6604 Installation Manual page 134

Figure 6-11 Set up an FTP updating environment
Connect the management Ethernet interface on the router to the PC using a crossover Ethernet Connect the management Ethernet interface on the router to the PC using a crossover Ethernet Connect the management Ethernet interface on the router to the PC using a crossover Ethernet

cable.
Configure the IP addresses of the server and the PC to be on the same network segment.

Ensure the connectivity between the router and the PC. In this example, the IP address of the Ensure the connectivity between the router and the PC. In this example, the IP address of the Ensure the connectivity between the router and the PC. In this example, the IP address of the
management Ethernet interface on the router is 192.168.80.10, and that of the PC is management Ethernet interface on the router is 192.168.80.10, and that of the PC is management Ethernet interface on the router is 192.168.80.10, and that of the PC is
192.168.80.200.
You can use the ping command to check whether the connection is successful.

You can update the applications of the device through the console port or the management You can update the applications of the device through the console port or the management You can update the applications of the device through the console port or the management
Ethernet interface.
Step2 Enable the FTP service.
# Enable FTP server.
<HP> system-view
[HP] ftp server enable
# Add FTP username and password. # Add FTP username and password.
[HP] local-user guest
New local user added.
[HP-luser-guest] service-type ftp
[HP-luser-guest] password simple 123456 guest] password simple 123456
[HP-luser-guest] authorization
Table 6-11 Description on the display information of enabling the FTP service Description on the display information of enabling the FTP service
ftp server enable
local-user guest
Set up an FTP updating environment
addresses of the server and the PC to be on the same network segment. addresses of the server and the PC to be on the same network segment.
command to check whether the connection is successful. command to check whether the connection is successful.
type ftp
authorization-attribute level 3
Display information Display information Description Description
Enable the FTP server function. Enable the FTP server function.
Create a local user, and enter user view. Create a local user, and enter user view.