HP A6604 Installation Manual page 142

Setting application file attributes at the CLI
In the following description the files main.bin and main_bak.bin mentioned above are taken as
examples.
# Change the attribute of the file main.bin file from B to M + B.
<<HP> boot-loader file main.bin slot 1 main
This command will set the boot file of the specified board. Continue? [Y/N]:
The specified file will be used as the main boot file at the next reboot!
Now the attribute of the file main.bin has changed from B to M + B and the file will be used as
the main application file at the next boot, while the attribute of another existing file main_bak.bin
has automatically changed from the original M to N/A.
You can verify the changes of the file attributes by viewing all the files through the file control
sub-menu.
Select 2 from the file control sub-menu. The system displays the following information:
'M' = MAIN 'B' = BACKUP
======================================================================
|NO. Size(B) Time
|1 24802996 Nov/04/2007 17:03:26 M+B
|2 24802996 Nov/11/2007 15:11:42 N/A
|0 Exit
======================================================================
Enter file no:
For details about the boot-loader command, refer to Device Management in the System
Volume of HP SR6600 Routers User Manual.
Setting Configuration File Attributes
Setting configuration file attributes on the BootWare menu
You can modify the file attributes on the BootWare menu. For details about configuration file
attributes, refer to "Configuration
Select 3 from the file control sub-menu. The system displays the following information:
'M' = MAIN 'B' = BACKUP
=========================================================================
|NO. Size(B) Time
|1 734 Dec/17/2000 11:47:20 N/A
|2 760 Dec/17/2000 18:49:50 N/A
|3 810 Dec/17/2000 18:49:26 M
|4 850 Dec/17/2000 18:50:08 N/A
|0 Exit
=========================================================================
Enter file No:
Select a file number, which is 1 in this example. The following information
appears:
Modify the file attribute:
=========================================================================
|<1> +Main
|<2> -Main
|<3> +Backup
|<4> -Backup
'S' = SECURE
Type Name
cfa0:/main.bin
cfa0:/main_bak.bin
Files" on page 6-2.
'S' = SECURE
Type Name
cfa0:/startup.cfg
cfa0:/startup_bak2.cfg
cfa0:/startup_bak1.cfg
cfa0:/startup_bak3.cfg
'N/A' = NOT ASSIGNED
'N/A' = NOT ASSIGNED
|
|
|
|
|
|
|
|
|
|
|
|
|
|