HP A6604 Installation Manual page 29

Maximum interface modules provided by FIP-110s in full configuration
Table 1-22 Maximum interface modules provided by FIP-110s in full configuration
Interface
module
FIP-110
MIMs
HIMs
FIP-200
Introduction
Flexible interface platform-200 (FIP-200), another type LPU of the device, provides a high-
speed service processing capability. FIP-200 supports SR6600 HIMs and some HP legacy
MIMs and provides two Combo interfaces. In consideration of the smooth upgrade
requirements, FIP-200 supports two HIMs or two MIMs, or intermixing of an HIM and an MIM.
Figure 1-23 Front view of FIP-200
(1) Slot 1
(3) Combo interface 0
(5) OPEN BOOK sign
"OPEN BOOK" sign – Refer to related sections when performing the following operations:
Operation
Plug/unplug an FIP-200
Plug/unplug an MIM
Connect an Ethernet cable
Connect an optical fiber
Technical specifications
Table 1-23 Technical specifications for FIP-200
Item
Processor
Processor cores
Flash
One RPE-X1
A6604 A6608 A6604
2 4 2
8 16 8
Not supported
"Installing and Removing an FIP" in Chapter 4 "Installing the Router"
"Installing and Removing a MIM" in Chapter 4 "Installing the Router"
"Connecting the Management Ethernet Interface" and "Connecting Ethernet
Cables" in Chapter 4 "Installing the Router"
"Connecting an optical Ethernet interface" in Chapter 4 "Installing the Router"
Multi-core MIPS CPU, 1 GHz
8
4 MB
Two RPE-X1s One RSE-X1
A6608 A6604
4 2
16 8
(2) Slot 2
(4) Combo interface 1
Reference
Specifications
Two RSE-X1s
A6608 A6604 A6608
4 1 3
16 4 12