HP A6604 Installation Manual page 141

3 -rw- 24802996
505480 KB total (456576 KB free)
File system type of cfa0: FAT16
Table 6-14 Description on the display information of the dir command
Display information
Directory of cfa0:/
505480 KB total (456576 KB free)
File system type of cfa0: FAT16
For details about the dir command, refer to File System Management in the System Volume of
HP SR6600 Routers User Manual.
Setting Application Files Attributes
Setting application file attributes on the BootWare menu
You can modify the attributes of the main, backup, and N/A application files on the BootWare
menu or using commands after the application files boot; however, you cannot modify the
attribute of the secure application file. For details about application file attributes, refer to
"Application Files" on page 6-1.
Select 2 on the file control sub-menu, and the system displays:
'M' = MAIN 'B' = BACKUP
======================================================================
|NO. Size(B) Time
|1 24802996 Nov/04/2007 17:03:26 B
|2 24802996 Nov/11/2007 15:11:42 M
|0 Exit
======================================================================
Enter file no:
Enter the file number, select 1, and the system prompts:
Modify the file attribute:
======================================================================
|<1> +Main
|<2> -Main
|<3> +Backup
|<4> -Backup
|<0> Exit
======================================================================
Enter your choice(0-4):
You can set the file attribute to M (main) or B (backup), or cancel the setting by selecting a
choice from 1 to 4. For details of each type of files, refer to
Functions" on page 6-1.
In the example, 1 is selected and the system changes the attribute of the file main.bin from B to
M + B.
Set the file attribute success!
Now, the attribute of the file main_bak.bin automatically changes from M to N/A.
Nov 13 2007 13:21:20
Name of the current directory.
Used space of the CF card (available space)
File system type of the CF card.
'S' = SECURE
Type Name
cfa0:/main.bin
cfa0:/main_bak.bin
main.bin
Description
'N/A' = NOT ASSIGNED
"Software Components and
|
|
|
|
|
|
|
|
|