HP A6604 Installation Manual page 138

TFTP: 24384324 bytes received in 101 second(s)
File downloaded successfully.
On a device configured with an RSE-X1

<HP> tftp 192.168.80.200 get main.bin slot2#cfa0,/main.bin
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait...|
TFTP: 44836864 bytes received in 188 second(s)
File downloaded successfully.
Step4 Specify the application file on the standby MPU to be used at next startup.
On a device configured with an RPE-X1

<HP>boot-loader file slot4#cfa0:/main.bin slot 4 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot
4!
On a device configured with an RSE-X1

<HP> boot-loader file slot2#cfa0:/main.bin slot 2 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot
2!
Step5 Use the display boot-loader [ slot slot-number ] command to view the application files to be
used by the active and standby MPUs for booting the system. Make sure the application files
are of the same version.
Step6 After rebooting the standby MPU using the slave restart command in system view, use the
display version command to view the current version of the application files. If the application
files have the new version, you have succeeded in updating the application files on the standby
MPU.
Step7 Use the display device command to view the status of the active and standby MPUs. If both
MPUs are in the normal status, the active and standby MPUs are normal.
On a device configured with an RPE-X1

<HP> display device
Slot No. Board type
---------------------------------------------------------------------
0 N/A
1 FIP-200
2 N/A
3 N/A
4 RPE-X1
5 RPE-X1
6 N/A
7 N/A
8 FIP-200
9 N/A
On a device configured with an RSE-X1

<HP> display device
Slot No Board type
---------------------------------------------------------------------
1 RSE-X1
2 RSE-X1
3 FIP-110
4 FIP-210
Status Primary
Absent N/A
Normal N/A
Absent N/A
Absent N/A
Normal Slave
Normal Master
Absent N/A
Absent N/A
Normal N/A
Absent N/A
Status Primary
Normal Master
Normal Slave
Normal N/A
Normal N/A
SubSlots
N/A
2
N/A
N/A
0
0
0
N/A
2
N/A
SubSlots
0
0
4
2