HP A6604 Installation Manual page 18

1 GB

Use CF cards provided by HP only. The device may be incompatible with other CF cards.

CF cards less than 256 MB are not supported.

2) CF card and slot
Figure 1-13 CF card and slot
(1) Eject button (CF card)
(3) CF LED (CF)
3) CF LED
For the description of the CF LED, see
The CF card is hot-swappable. When the CF LED is blinking, do not unplug the CF card.
Otherwise, the file system on the CF card will be damaged.
Console port
1) Introduction
The device provides an RS232 asynchronous serial console port that can be connected to a
computer for system debugging, configuration, maintenance, management, and host software
loading.
2) Technical specifications for the console port
Table 1-12 Technical specifications for the console port
Connector
Compliant standard
Baud rate
Transmission Distance
Services
3) Console cable
The console cable is an 8-core shielded cable. The RJ-45 connector at one end of the cable is
for the console port on the router, and the DB-9 female connector at the other end is for the
serial port on a configuration terminal.
Figure 1-14 illustrates the console cable.
Table 1-9
Item
RJ-45
Asynchronous EIA/TIA-232
9600 bps to 115200 bps
9600 bps (default)
≤ 15 m (49.21 ft.)
Connection to an ASCII terminal
Connection to the serial interface of a local PC to run the terminal
emulation program
Command line interface (CLI)
(2) CF card slot
and Table 1-11.
Specification