Table of Contents
Advertisement
Smt4EN-Ad-F_FM.book Page 161 Friday, December 8, 2000 3:42 PM
Values vary according to options installed and settings of the User Parameters.
In Fax Standby mode, letting the heating roller cool to room temperature will re-
duce the amount of electricity the fax machine consumes. However, the fax ma-
chine will not print incoming messages right away, it will store them in memory
and print them out after the roller warms up.
In Energy Saving Standby mode, letting the heating roller cool halfway reduces
the amount of electricity the fax machine consumes, but not as much as letting it
cool to room temperature. On the other hand, since warming up takes only a
short time, incoming fax messages can be printed right away.
When the machine is shipped, Energy Saving Standby is selected on by default.
Note
❒ When the machine is in Energy Saving mode, the display goes blank.
❒ You can still send fax messages while the machine is in Energy Saving mode.
❒ For related power saving information, see P.93 "Energy Save Timer".
❒ The Manual Receive indicator goes out in Energy Saving mode even if Man-
ual Receive is turned on.
❒ Even though the operation panel display goes out in Energy Saving mode, in-
dicators that flash or light during communication or reception still work.
When the Receive File indicator lights, exit Energy Saving mode and take ap-
propriate action.
Entering Energy Saving mode
The machine enters Energy Saving mode when:
• Nobody uses the machine for about 5 minutes (it automatically enters Energy
Saving mode).
• The user holds down the {Energy Saver/3Clear Modes} key for about 2 seconds.
Note
❒ If you want to change the five minute period to one or three minutes, or if you
do not want your machine to enter the Energy Saving mode automatically,
please contact your service representative.
❒ Energy Saving mode cannot be entered when a document is set.
Exiting Energy Saving mode
Your machine exits Energy Saving mode when a fax is received.
To exit Energy Saving mode manually:
• In Energy Saving Standby mode, press the {Energy Saver} key.
• In Fax Standby mode, press any key.
• Set a document.
• Pick up the optional handset or the external telephone handset.
Printed Matters
Specifications
11
161
Advertisement
Table of Contents
