On Hook Dial - Ricoh FAX3900L Operating Instructions Manual

Smt4EN-Ad-F_FM.book Page 29 Friday, December 8, 2000 3:42 PM

On Hook Dial

You can send a fax message without
lifting the receiver, while still listen-
ing to the dial tone.
If the other party has a telephone fax
machine, you can talk by lifting the
receiver after your machine has con-
nected to theirs.
A
Make sure that the machine is in
standby mode.
Ready
Set Orig./ Enter No.
B
Carefully place your fax message
in the auto document feeder.
C
Press the { { { { On Hook Dial} } } } key.
You will hear a dial tone coming
from the machine's internal speaker.
Note
❒ If you press the {On Hook Dial}
key once more, the machine will
hang up and the dial tone will
stop.
On Hook:
_kkkkkkkkkkkkkkkkkkk
D
Specify the destination.
The destination you specify is di-
aled immediately.
If you misdial the number, press
either the {On Hook Dial} key or the
{Stop} key, and repeat the proce-
dure from step C.
On Hook:
0123456789_kkkkkkkkk
Printed Matters
100% 02:39PM
E
When you hear a high-pitched
tone, press the { { { { Start} } } } key.
Transmission starts.
Once the fax is sent, the machine
returns to standby mode.
ABC COMPANY
A4->A4 Transmitting
Reference
To adjust the volume:
See Chapter 4, "Adjusting the
Volume and Sounds the Ma-
chine Makes" in the Basic Fea-
tures manual.
To stop transmission:
If you want to stop a fax mes-
sage during transmission, press
the {Stop} key, and then remove
the document from the auto
document feeder.
On Hook Dial
3
29