Table of Contents
Advertisement
Smt4EN-Ad-F_FM.book Page 28 Friday, December 8, 2000 3:42 PM
Other Transmission Features
Dial Options
The Dial Options provide access to
various code features which are de-
signed to allow confidential transmis-
sion and polling reception between
different fax machines. Use them if
the other party's fax machine is of a
different make and supports the code
features. Further, the Dial Options al-
3
low you to send faxes using a sub-ad-
dress when your fax machine is
connected to ISDN only. Before you
can use the Dial Options, you need to
program the Dial Options features in
the User Functions keys. (See P.58
"User Function Keys".)
Available Dial Options are as follows:
• SUB, SID, SEP, PWD
• SUB-ADDRESS (Requires the op-
tional ISDN INTERFACE UNIT
TYPE 190.)
Note
❒ You can program sub-addresses
in the User Functions key.
Limitation
❒ The maximum number of digits
you can enter for SUB, SEP, SID,
and PWD is 20.
❒ The maximum number of digits
you can enter for sub-address is
19. It may be any string of 20
numbers (0 to 9) or symbols (#
and *).
A
Make sure that the machine is in
standby mode.
Ready
Set Orig./ Enter No.
B
Carefully place your fax message
in the auto document feeder.
28
Printed Matters
100% 02:39PM
C
Enter the destination with the
number keys.
Dest.1
OK to Add
0123456789_kkkkkkkkk
D
Press the User Functions key that
is programmed with the Dial Op-
tions feature.
E
Press 0 0 0 0 or 1 1 1 1 to display the item
you want to set.
Dial Option:
1.SUB
F
Press the { { { { OK} } } } key.
G
Enter the code with the number
keys.
If you want to erase a digit of the
number, press the {Clear} key and
re-enter the digit.
SUB:
1234_kkkkkkkkkkkkkkk
H
Press the { { { { OK} } } } key.
Dest.1
OK to Add
0123456789_kkkkkkkkk
If you want to specify another des-
tination, press the {OK} key and re-
peat the above steps from step C.
I
Press the { { { { Start} } } } key.
hi
Press OK
Advertisement
Table of Contents
