Storing Isdn Telephone Numbers - Ricoh FAX3900L Operating Instructions Manual

Hide thumbs Also See for FAX3900L:
Table of Contents

Advertisement

Smt4EN-Ad-F_FM.book Page 113 Friday, December 8, 2000 3:42 PM
❖ ❖ ❖ ❖ Programming I-G3 SPID (I-G3 Own
Number 2)
When you have two units connect-
ed to the same line, enter the I-G3
SPID number.
If "ISDN Directory Number Select
(SPID)" in the User Parameters is
turned off, the display shows "I-G3
Own Number 2" instead of "I-G3
SPID". These settings are identical.
❖ ❖ ❖ ❖ Programming the I-G3 Sub-address
When multiple terminals (faxes,
digital phones, and so on) are con-
nected to the same line, program a
sub-address for each terminal.
Note
❒ You can enter up to 4 digits.
❒ You can enter numbers from 0
to 9999.
Storing ISDN Telephone
Numbers
You must be careful to select the correct
signaling type (Group 3 or Group 4) when
dialing, or when storing a telephone
number as a Quick Dial or Speed Dial.
To register G4 Terminal ID, perform
the following procedure.
A
Make sure that the machine is in
standby mode.
B
Press the { { { { User Tools} } } } key.
C
Press 0 0 0 0 or 1 1 1 1 to display "4. Key
Op. Tools".
User Tools Main Menu
4.Key Op. Tools
D
Press the { { { { OK} } } } key.
E
Press { { { { 2} } } } { { { { 2} } } } { { { { 2} } } } { { { { 2} } } } , and then
press the { { { { OK} } } } key.
Printed Matters
F
Press 0 0 0 0 or 1 1 1 1 to display "17.
ISDN G3 / G4".
Key Op. Tools:
17.ISDN G3/G4
G
Press the { { { { OK} } } } key.
To register G4 Terminal ID
A Confirm that "1. G4 Terminal
ID" is displayed.
ISDN G3/G4:
1.G4 Terminal ID
B Press the { { { { OK} } } } key.
C Enter your country code.
If you make a mistake, press the
{Clear} key and try again.
CountryCode:Press OK
[0000]
D Press the { { { { OK} } } } key.
E Enter the fax number.
If you make a mistake, press the
{Clear} key and try again.
Fax Number: Press OK
[012345678901]
F Press the { { { { OK} } } } key.
G Enter the name.
If you make a mistake, press the
{Clear} key and try again.
Name:[ABC]
[ABC COMPANY_kkkkkk]
hi
H Press the { { { { OK} } } } key.
G4 Terminal ID is registered.
ISDN G3/G4
hi
hi
7
OK
113

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fax3900nf

Table of Contents