Smt4EN-Ad-F_FM.book Page 155 Friday, December 8, 2000 3:42 PM
Connecting the Power and Switching On
Important
❒ Make sure that the wall outlet is
near the machine and readily ac-
cessible.
❒ The wall outlet must be easily ac-
cessible.
Do not switch on until everything is
connected properly.
A
Insert the power cable into the
socket located at the rear of the
machine.
B
Plug in the cable to the mains.
C
Turn the power switch on.
TSTP090N.eps
Important
❒ The supply from the wall outlet
must not fluctuate more than
15V either side of 120V.
❒ The power cord should not be
laid in a place where it might
trip somebody.
❒ Do not lay anything on the pow-
er cord.
❒ If you have to use an extension
cord, make sure that it is capa-
ble of carrying 125V/15A, and
that your facsimile terminal is
the only piece of equipment
connected to that cord.
Printed Matters
Connecting the Power and Switching On
TSTP090N
10
155