Table of Contents
Advertisement
Smt4EN-Ad-F_FM.book Page 32 Friday, December 8, 2000 3:42 PM
Other Transmission Features
Tone Signals
On this model the {p} key on the
number keys is used as the Tone key.
Some organizations offer you a spe-
cial service by telephone, which you
can access by transmitting touch
tones. If your phone service provides
only pulse dialing, the ability to gen-
erate Tone Signals will allow you to
3
access these services.
First, dial the other party. When you
are through to the other end, press
the {p} (Tone) key and enter the
code number that is needed to access
the required feature at the other ter-
minal. You do not need to press the
{p} (Tone) key if your machine is set
up for dialing in Tone Dial (DTMF)
mode.
Using the { { { { p
p } } } } (Tone) Key
p
p
A
Make sure that the machine is in
standby mode, and that there is
no document in the feeder.
B
Pick up the telephone handset, or
press the { { { { On Hook Dial} } } } key.
C
Dial the remote facility. Do not
press the { { { { Start} } } } key.
Note
❒ If your telephone line type is a
tone dial line, go to step E.
D
After your line is connected to the
remote facility, if your telephone
line type is Pulse Dial, press the
{ { { { p
p
p } } } } key on the number keys.
p
A dot appears in the display.
32
Printed Matters
E
Enter the digits that you need to
use for remote facility. After you
have finished your business with
the remote facility, hang up.
Note
❒ Procedures very according to
service.
Advertisement
Table of Contents
