To correct faulty stacking or blowing out:
1. Remove workpiece from the light beam.
You can start a new sewing process.
4.16 Setting up double pipe/single pipe
4.16.1 Changing the folder tools
Fig. 27: Changing the folder tools (1)
(1) - Spindles
To change the folder tools:
1. Press Folder change position
2. The spindles (1) move up.
3. Switch off the machine.
40
NOTICE
Property damage may occur!
Acting in a careless manner when changing the folder tools may
damage the folder tools and render them useless.
Always proceed with utmost caution when changing the folder tools.
①
①
on the start screen.
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
Operation