Operation
4.18 Adjusting the programmable marking lamp (lengthwise)
Fig. 39: Adjusting the programmable marking lamp
①
(1) - programmable marking lamp
The programmable marking lamp (1) can be programmed in sewing
direction. The marking lamp lines up automatically with the corresponding
positioning point (front/middle/back).
The programmable marking lamp (1) is set using the OP7000 control
panel. Program parameters > Vertical programmable
marking lamps ( p. 145).
50
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021