Operation
4.27.4 Throw-over stacker
The throw-over stacker is used to clamp and stack jackets or trousers.
It can be adjusted to the stacking height and the distance to the machine.
Fig. 52: Throw-over stacker
For instructions on how to assemble the throw-over stacker, refer to
the Setup chapter, p. 313.
The setting for the throw-over stacker is made using the OP7000 control
panel. Program parameters > Stacker/smoother/ blow-off/
roll-off ( p. 179).
4.27.5 Pincer stacker
The pincer stacker can be used for stacking long and short workpieces.
Fig. 53: Pincer stacker
The setting for the pincer stacker is made using the OP7000 control panel.
Program parameters > Stacker/smoother/ blow-off/roll-
off ( p. 179).
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
61