Outfeed Roller; Smoother - Dürkopp Adler 755 B Operating Instructions Manual

Operation

4.27.2 Outfeed roller

Fig. 49: Outfeed roller
(1) - Transport rollers
The transport rollers (1) convey the workpiece into the stacker opening.
The setting for the roll-off speed and the duty cycle is made using the
OP7000 control panel. Program parameters > Stacker/smoother/
blow-off/roll-off ( p. 179)
Information
The outfeed roller serves a dual function:
• Stacker switched on: Outfeed roller as stacker extension during the pro-
• Outfeed roller as ejector in combination with the bundle clamp during

4.27.3 Smoother

The smoother keeps the sewn trousers parts from twisting if a bundle
clamp is used during sewing. The sewn trousers parts are thus positioned
straight and neatly in the bundle.
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
• This is necessary for workpieces positioned in the longitudinal
direction
• It is also necessary for workpieces which are too short to be seized
by the throw-over stacker
• Minimum distance: 200 mm from the middle of the pocket opening
to the edge of the workpiece
duction of jackets
the production of trousers
①
59