4.8 Lateral setting of straight stitches on throat plate needle
Proper setting
If the sewing equipment allows using the maximum zigzag stitch width,
which is characteristic of the particular machine type, the position of the
border straight stitches should be adjusted so that it aligns with the zigzag
stitch border. If the throat plate needle hole is narrower than the maximum
zigzag stitch width of the particular sewing machine type, the lever for the
position setting of the border stitch must be fixed in the central position.
Pic. 17: Lateral setting of straight stitches
(1) - Lever
(2) - Stop
(3) - Screw
(4) - Lever
(5) - Arresting lever
(6) - Casing
1. Loosen the screw (3) and turn the lever (1) to the position, in which the
2. Locate the stop (2) to the lever (1) and fix it with the screw (3).
3. Loosen the screw (10) and turn the lever (1) to the position, in which
4. Locate stop (9) to the lever (1) and fix it with the screw (10).
5. Adjust the arresting lever (5) in this position.
26
Zigzag stitch mechanism of machines 523, 524, 527
hole edges, arresting of zigzag stitch setting mechanism
③
①
②
⑪
needle will perform no lateral motion when turning the lever (4).
the needle performs no side motion when moving the lever (4).
④
①
⑩
⑨
(7) - Screw
(8) - Arresting nut (invisible)
(9) - Stop
(10) - Screw
(11) - Regulating screw
Service Instructions 52Xi, 52Xi-75 - 03.0 - 09/2023
⑤
⑥
⑧
⑦