7.11 Connecting the vacuum compressor in the machine
Fig. 272: Connecting the vacuum compressor in the machine
(1) - Filter ring
To connect the vacuum compressor in the machine:
1. Connect the hose (2) of the vacuum compressor.
2. Fit the filter ring (1).
324
NOTICE
Property damage may occur!
The blower overheats.
The motor winding becomes damaged.
When mounting the vacuum device (side-channel blower), you
MUST replace the sealing ring (black) with a filter ring (1) (white).
The filter ring (1) is included in the accessory pack.
①
(2) - Hose
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
Setup
②