Table of Contents
Advertisement
Setup
To adjust the lateral position of the pedals:
1. Loosen the screws (1).
2. Shift the pedal laterally on the stand bar.
3. Tighten the screws (1).
To shift the position of the pedals to the front or the rear:
1. Loosen the screws (3).
2. Slide the pedals forward or backward.
3. Tighten the screws (3).
7.3 Assembling the reel stand
Fig. 256: Assembling the reel stand
(1) - Unwinder arms
(2) - Slotted hole
To assemble the reel stand:
1. Insert the reel stand (3) into the slotted hole (2) in the tabletop and
2. Assemble and align the reel plate (4) and the unwinder arms (1) as
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
②
assemble it with washer and nut below the tabletop.
shown in the figure.
③
④
(3) - Reel stand
(4) - Reel plate
①
311
Advertisement
Table of Contents
