Table of Contents
Advertisement
5.11 Setting batch mode
Batch mode is a function that is used to set a specific batch size / number
of sewing processes.
You can, for instance, define that one batch is composed of 5 sewing pro-
cesses. In this case, all barcodes parts primary and, if applicable, all multi
barcodes will only be requested once at the beginning of the sewing pro-
cess, and all 5 sewing processes will be completed before the barcodes are
requested again at the beginning of the 6
To activate the batch mode function:
1. Log in with security level 2 ( p. 75).
2. Open the Setup display ( p. 132).
3. Go to the Components section and activate the With batch mode
The chechmark confirms that the function is active.
Information
If, at the beginning of the sewing process, multi barcodes are requested
as well, go to the Components section and activate the function Multiple
barcodes with batch mode instead of the With batch mode function.
4. Open the Barcodes display ( p. 156).
5. Specify under Mask batch size the position at which the batch size
6. If you, for instance, wish the batch size to be 5, the digit to be read in
5.12 Setting multi barcodes
The machine can be set such that up to 9 multi barcodes will be requested
at the beginning of a sewing process.
The multi barcodes will be requested after the barcodes parts primary and
scanned using the hand scanner.
To set multi barcodes:
1. Log in with security level 2 ( p. 75).
2. Open the Setup display ( p. 132).
3. Open the Barcodes display ( p. 156).
The display switches to:
162
function.
is defined in the barcode.
the barcode must be the number 5:
000010000000000000000000000000
th
sewing process ( p. 162).
Operating Instructions 550-D800 - 01.0 - 05/2023
Programming
Advertisement
Table of Contents
