Table of Contents
Advertisement
Operation
Information
The setting for the downholder, pocket bag clamp (pneumatic) and waist-
band clamp - also in combination with downholder / vacuum - is made
using the OP7000 control panel. Program parameters > Program
loading process > Select downholder mode ( p. 171).
4.27.14 Shims
Fig. 64: Shims
①
(1) - Shims
The shims kit can be used for materials that are difficult to sew or transport
such as lining, viscose, leather and rubber coated fabrics.
While being fed, the sewing material is held in place by the transport
clamps and the shim to keep the layers of material from shifting.
The shims can be switched on and off in the Machine configuration
at the OP7000 control panel ( p. 187). When the shims are switched on,
the corresponding icon is displayed on the start screen.
74
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
Advertisement
Table of Contents
