Table of Contents
Advertisement
Setup
Fig. 268: Table extension (right) (2)
(2)
(5) - Screws
5. Tighten the winder (4) to the table extension (2) using 4 screws (3).
6. Connect the winder (4) ( p. 319).
7.8 Electrical connection
Important
The voltage on the type plate of the sewing motor must correspond to
the mains voltage.
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
- Table extension
DANGER
Risk of injury from electricity!
Unprotected contact with electricity can result in
serious injuries or death.
Work on the electrical system must ONLY be
carried out by qualified electricians or appropriately
trained and authorized personnel.
ALWAYS pull the power plug before working on
the electrical equipment.
④
③
②
o
(6) - Winder
319
Advertisement
Table of Contents
