17Flap Stopper (Mechanical) - Method F - Dürkopp Adler 755 B Operating Instructions Manual

Operation
4.27.17 Flap stopper (mechanical) - method F
The mechanical flap stopper ensures that the distance between the flap's
outer edge and the seam always stays the same when the flap is loaded
into the retracted and open turning device. The adjustment range is
between 35 and 75 mm.
Fig. 67: Flap stopper (mechanical) (1)
(1) - Flap stopper
To adjust the mechanical flap stopper:
1. The mechanical adjustment of the flap stopper (1) is made at the top
Fig. 68: Flap stopper (mechanical) (2)
(2)
2. Swivel down the flap stopper (1).
3. Loosen the counternut (3).
4. Screw the screw with scale (2) in or out:
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
using the screw with scale (2) when the flap stopper (1) is swiveled out.
- Screw with scale
screwing in:
the stopper is moved to the right - increasing the distance for wider flaps
screwing out:
the stopper is moved to the left - reducing the distance for narrower flaps
(2) - Screw with scale
③
②
(3) - Counternut
②
①
77