Method B - Dürkopp Adler 755 B Operating Instructions Manual

4.28.2 Method B

Sewing pocket openings with flap in jacket front parts
Positioning points for left or right jacket front parts
Fig. 70: Sewing pocket openings with flap in jacket front parts (1)
(1) - Dart
(2) - Right jacket front part
(3) - Left jacket front part
(4) - Light spot seam end
Important
To achieve the best possible result when sewing the flap to the jacket front
part, you will need to ensure a good match of stripes and checks even
while preparing the sewing materials.
The alignment needed to match checks and stripes should always be
made in the front to middle section of the flap relative to the jacket front
part.
Information
Please note: Check and stripe material requires that you mark the flap
manually.
80
②
③
①
① ⑦
(5) - Light spot flap's outer edge
(6) - Light spot seam beginning
(7) - Light spot middle knife incision
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
Operation
⑥
⑤
⑤
④
⑦