Setting The Language - Dürkopp Adler D888 e-con Operating Instructions Manual

Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023
5.3.1

Setting the language

Here, you can set the language of the software.
Fig. 41: Setting the language (1)
(1) - Language indicator
To set the language:
1. Press on the language indicator (1).
 A list holding the language selection opens:
Fig. 42: Setting the language (2)
2. Press to select the desired language.
 The language of the control panel is changed immediately.
①
67