Additional Equipment; Blow-Out Device - Dürkopp Adler 755 B Operating Instructions Manual

Operation

4.27 Additional equipment

4.27.1 Blow-out device

The blow-out device (1) is used in conjunction with the bundle clamp.
The blow tube conveys the sewing material out of the stacking position.
Fig. 48: Blow-out device
①
(1) - Blow-out device
The setting for the blow-out device is made using the OP7000 control
panel. Program parameters > Stacker/smoother/ blow-off/
roll-off ( p. 179).
Information
The blow tube continues to blow until the light barrier used for stacker con-
trol is clear.
58 Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021