Table of Contents
Advertisement
Operation
4.27.9 Feeding devices for flaps and pocket bags and/or additional
Thanks to these feeding devices, flap and pocket bags are positioned
manually as early as during the cycle time.
Fig. 58: Feeding devices for flaps and pocket bags
②
(1) - Clamp left
(2) - Feeding device left
To operate the feeding devices:
1. The settings for the feeding devices for flaps and pocket bags are made
The feeding device is switched on.
2. Press the right pedal forward and keep it there.
Both clamps (1) and (4) of feeding devices (2) and (3) open.
3. Insert the flap or additional part into the feeding device on the left (2)
4. Release the right pedal.
Clamps (1) and (4) close.
5. Press the right pedal back and keep it there.
The clamp of the right feeding device (3) opens.
6. Position the flap or additional part at the stops of the feeding device (3).
7. Release the right pedal.
The clamp (4) of the feeding device on the right (3) closes.
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
parts
①
using the OP7000 control panel. Program parameters > Program
loading process > Feeder on ( p. 171).
and/or the right (3).
(3) - Feeding device right
(4) - Clamp right
④
③
67
Advertisement
Table of Contents
