Table of Contents
Advertisement
Maintenance
Check and clean daily
• Use a compressed air gun to clean the areas of hook (2) and (3).
• Clean the lenses of light barriers (1) and (4) at the remaining thread
• To clean the filter ring (5) at the vacuum valve (6): Blow out the filter
6.2 Cleaning the incision device for piping ends
To clean the incision device for piping ends:
1. Switch off the machine.
2. Remove the pick-up folder.
Fig. 242: Cleaning the incision device for piping ends (1)
(1) - Screws
3. Loosen the screws (1).
4. Remove the piping strip rest table (2).
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
monitor with a soft cloth every time you change the bobbin.
using a compressed air gun.
WARNING
Risk of injury from sharp parts!
Punctures and cutting possible.
Switch off the machine prior to any maintenance
work.
①
①
(2) - Piping strip rest table
②
293
Advertisement
Table of Contents
