Safety Information; Regulatory Compliance; Standards Or Regulations; Ce Mark Requirements - Siemens ADVIA 2120 Operator's Manual

Safety Information

Safety features have been incorporated into the ADVIA 2120/2120i system to
protect the operator from injury, the analyzer from damage, and the test results
from inaccuracies.

Regulatory Compliance

Standards or regulations

The ADVIA 2120/2120i conforms to the following safety standards or
regulations:
EN61010-1: 1993
EN60825-1
UL 3101-1
CAN/CSA C22.2 No.
1010.1 - 92
CFR 47: Chapt. 1
FCC Subpart B
Part 15.103
Exempted Devices (C)
Part 15.105 (A)

CE mark requirements

The ADVIA 2120/2120i conforms to the following standard. It therefore meets
the EMC conformity requirements for "CE" marking according to the European
IVDD Directive 98/79 EC.
EN 61326-1 1997+
A1:1998 + A2:2001
(Class "A")
Warnings and Safety Information
Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use; Part 1
Safety of Laser Products; Part 1
Electrical Equipment for Laboratory Use; Part 1:
General Requirements.
Safety requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use; Part 1:
General Requirements
This equipment has been tested and found to comply
with the limits of a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference when equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference,
in which case the user will be required to correct the
interference at his own expense.
Electrical Equipment for measurement, control, and
laboratory use - EMC requirements
B-3