Logging Off - Siemens ADVIA 2120 Operator's Manual

6. If desired, select the check boxes for any files you want to back up. Verify
the destination for the Q.C. file backup.
7. Select the
8. Note the values in Total Samples and To be purged fields. In the To be
purged field, enter the number of records, if any, you want deleted from the
All Complete file.
9. Select
10. If you requested a backup in step 6, you will be asked to insert a formatted
disk into the disk drive.
Requirements for backup disks are as follows:
•
•
•
•
When several disks are required, the internal label entered during formatting
for each disk must be the same. To visually identify each disk, write a
sequence number on the disk paper label only.
To format and label a disk, select the
Restore

Logging Off

1. At the
2. Select
Daily Routine
Purge Database
to confirm and start.
OK
Programs: Format one or more disks with the label
Dictionaries: Format one disk with the label
Cumulative Quality Control: Format one disk, no label is necessary.
Database: Four formatted disks are required for 2000 All Complete
sample records. The database disks do not need to be labeled. The system
will automatically label the disk(s) during the backup procedure.
, and then select
Format
Operations menu, select
Log Off .
check box.
DICT
menu, select
Utilities
.
Log On / Off .
.
PRG
.
Backup /
3-11