Validating The Results - Siemens ADVIA 2120 Operator's Manual

Validating the Results

1. At the Data Manager menu, select
2. If not already done, select validation mode and access mode to determine
which sample records will be reviewed.
3. Review the displayed results. Scroll to view additional results.
4. You can:
•
•
•
•
5. Select
NOTE:
rerunning a sample. If not, the sample is rerun with the default selectivity.
Daily Routine
Go to step 5 if all results are acceptable.
Edit a result.
a. Select C.RES (current result) box for test.
b. Enter new value or comment code.
c. Select to exit, or
End
You can select
Individual
all results, or Pending
Apply a disposition to an individual result.
a. Right-select the D
disposition.
b. Select the desired disposition.
None cancels any previous disposition.
repeats test with no dilution using the same sample ID. The
Rerun
letter R displays in D box.
swaps information in C.RES and PREV.RUN boxes. The
Exchange
letter X displays in D box.
Accept indicates result approved by operator. The letter A displays
in D box.
Delete erases the result. The letter D displays in D box.
repeats test with specified dilution using a different
Dil.Sample
sample ID. When result is available, select
- Consolidation) to enter result into original sample record.
Only Accept and Delete are available for control samples.
The disposition takes effect when you validate the results.
Apply a disposition to all results.
a. Select
Global Disposition
choose Global Disposition
b. Select the desired disposition. (See available dispositions above.)
The disposition takes effect when you validate the results.
OK to validate the sample results.
Be sure to complete sample validation (steps 1 through 5) before
Review / Edit .
to edit additional results.
Next
to edit one result,
to access only missing results.
column next to the test you want to receive the
, or select the
.
to access
Successive
Dil.Cons (Diluted sample
menu and then
Sample
3-9