Installation and configuration
SET DATE DISTANT (S D D)
This command configures the date kept at the distant end of the system. Its display is similar
to
Figure 37: SET DATE (S D) screen
SET ESAM (S E)
This command configures the settings for ESAM protection. Its display is similar to
SET ESAM (S E) screen
Note:
ESAM configuration values are stored on the RMI. If the user replaces the RMI for any
reason, all values set with the SET ESAM command and all commands on the ESAM setup
menu must be reconfigured.
Figure 38: SET ESAM (S E) screen
1. System Parameters — This variation of the SET ESAM command configures the
90
Mini-Carrier Remote Fundamentals
on page 90.
number of digits in the ESAM directory number for each channel and the trunk
access digit, or the number dialed by the user to obtain an outside line. Its display
is similar to
Figure 39: SET ESAM:SYSTEM PARAMETERS screen
page 91.
Comments? infodev@avaya.com
on page 89.
Figure 38:
on
March 2013