Avaya Communication Server 1000M Single Group Manual page 55
Mini-carrier remote fundamentals
Hide thumbs
Also See for Communication Server 1000M Single Group:
Table of Contents
Advertisement
To prepare the system for MCR installation, you must first install and verify the operation of the
local system, without linking to the MCR sites. Refer to Avaya Communication Server 1000M
and Meridian 1 Large System Installation and Commissioning, NN43021-310 and Avaya
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning,
NN43011-310.
Unpacking and inspection
Unpack and inspect the equipment for damage. When unpacking, follow general precautions
recommended by computer and telephone equipment manufacturers:
• Remove items that generate static charge from the installation site.
• Use antistatic spray if the site is carpeted.
• Ground yourself using a wrist strap and an antistatic mat before handling any
equipment.
• Remove equipment carefully from its packaging.
• Visually inspect the equipment for obvious faults or damage. Any damaged component
must be reported to your sales representative and the carrier who delivered the
equipment.
• Hold the plug-in cards by their nonconductor edges and keep them in their antistatic bags
until you are ready to install them.
• Do not stack the plug-in cards on top of each other.
Taking inventory
After the equipment has been unpacked and visually inspected, verify that all the equipment
is at the site before the installation begins. Refer to
hardware list
any shortages and report them to your sales representative.
Table 8: Mini-Carrier Remote-unique hardware list
Component
LMI (IPE)
NT5D64
LMX (IPE)
NT5D65
RMI
NT5D67
Mini-Carrier Remote Fundamentals
on page 55. Check equipment received against the shipping documents. Note
Local Mini-carrier Interface card (LMI) for installation in IPE shelf line
card slots.
Local Mini-carrier Extender card (LMX) for installation in IPE shelf line
card slots. Up to three LMXs may be installed, depending on
configuration.
Remote Mini-carrier Interface card (RMI) for installation in remote site
cabinets.
Table 8: Mini-Carrier Remote-unique
Description
System installation
March 2013
55
Advertisement
Table of Contents
