Installation and configuration
6. Trunk Parameters — This variation of the SET ESAM command allows the user
to change the parameters of any of the 8 trunks on the current board. Its display is
similar to
Figure 48: SET ESAM: TRUNK PARAMETERS screen
94
Mini-Carrier Remote Fundamentals
Figure 47: SET ESAM: PHONE PARAMETERS: XUT PARAMETERS:20PPS
MAKE/BREAK RATIO screen
Figure 48: SET ESAM: TRUNK PARAMETERS screen
a. Trunk type — This variation of the SET ESAM command allows the
user to change the trunk type of the selected trunk from its default of
"Unknown." Its display is similar to
PARAMETERS: TRUNK TYPE screen
Figure 49: SET ESAM: TRUNK PARAMETERS: TRUNK TYPE screen
b. Balance Impedance — This variation of the SET ESAM command
allows the user to change the balance impedance of the trunk from its
default of "Complex." Its display is similar to
TRUNK PARAMETERS: BALANCE IMPEDANCE screen
page 95.
Comments? infodev@avaya.com
on page 94.
Figure 49: SET ESAM: TRUNK
on page 94.
Figure 50: SET ESAM:
on
March 2013